Deburring Technologies

ADVANTAGES

Through the utilization of aerospace materials (Alumina Fiber Filaments), breakage, cracking, and chipping have been eliminated. High polishing efficiency can be ensured.
No clogging. Uniformly fine finishes can be achieved.
Thanks to the braided structure of the rod type, high polishing efficiency is possible even with the side, of the tool, and there is no splitting of the tip. (#220 is designed in a two way liner structure)
Suitable for fine deburring.
Higher polishing efficiency can be achieved by using the Meister Finishi with tools (electric, air, ultrasonic)
Coarse grit type made of thick Alumina Fiber Filaments is ideal for removing EDM scales. Only XEBEC can manufacture it.






	ADVANTAGES Through the utilization of aerospace materials (Alumina Fiber Filaments), breakage, cracking, and chipping have been eliminated. High polishing efficiency can be ensured. No clogging. Uniformly fine finishes can be achieved. Thanks to the braided structure of the rod type, high polishing efficiency is possible even with the side, of the tool, and there is no splitting of the tip. (#220 is designed in a two way liner structure) Suitable for fine deburring. Higher polishing efficiency can be achieved by using the Meister Finishi with tools (electric, air, ultrasonic) Coarse grit type made of thick Alumina Fiber Filaments is ideal for removing EDM scales. Only XEBEC can manufacture it.

	ADVANTAGES Both the Stick and the Rod types can be used to polish with the tip or the sides of the tools. Ideal for polishing after EDM and wire cut processing. Also ideal for polishing ribs and deburring edges and corners. Can be formed into desired shapes, such as a thinner tips. Can be used even more efficiently when attached to tools (electric, air, or ultrasonic).


	ADVANTAGES Ideal for precise polishing of free surfaces, free curves, ribs, bosses, etc., of various forming molds (especially plastic mold). High finishing efficiency can be attained without clogging, even for metals such as aluminum, copper, gun metal, etc., that clog with common abrasive stones. Use in narrow areas where common abrasive stones cannot be used because thay'll break. Use on complex shapes where uniform finishing could not previously be attained. Efficient EDM scale removal.


8241 Expansion Way, Huber Heights, OH 45424 (800) 306-5901 Phone (937) 482-4010 Fax Home\| About Us \| Contact \| Cross-Hole Deburring \| Cutting Fiber \| Ceramic Fiber Stone \| MSDS Information Literature Request \| News \| Shows & Conventions \| Local Sales Locator Updated: December 14, 2007 This page utilizes Macromedia Flash and Adobe Acrobat. If experiencing problems loading please download from Adobe's Website