ADVANTAGES
The tool head is made of Alumina Fiber abrasive stone. Cutting edges are exposed over the entire surface.
Efficient removal of fine burrs where the base thickness is 0.2 mm or less after machining.
Ideal for point processing of cross-hole fine deburring.
Flexible shaft allows soft contact with the workpiece.
Can also be used in a machining center, NC lathe, robot, etc.
ADVANTAGES
Powerful tip grinding with “XEBEC Cutting Fibers” in rods made of Alumina Fiber abrasive stone.
Centrifugal force spreads out the rods and efficiently removes cross-hole fine burrs in cylinders.
Precision removal of all fine burrs where the base thickness is 0.1 mm or less after machining.
Can also be used for polishing or scale removal on inner wall surfaces of cylinders.
8241 Expansion Way, Huber Heights, OH 45424 (800) 306-5901 Phone (937) 482-4010 Fax
Home| About Us | Contact | Cross-Hole Deburring | Cutting Fiber | Ceramic Fiber Stone | MSDS Information
Literature Request | News | Shows & Conventions | Local Sales Locator
Updated:
August 24, 2007
This page utilizes Macromedia Flash and Adobe Acrobat. If experiencing problems loading please download from Adobe's Website